5052-H112
[We can cut and mill]

■ Density ：
■ Features ：

■ Application ：
■ Origin ：

2.69
Thickness tolerance and flatness of 5052 are better 85% than JIS standard and less distortion after machining. Surface appearance are also good, this metal can be used for semi-finishing plate.
General machinary parts
Japan

Mechanical properties(Typical Value)

Tensil strength (N/mm2)	Resistance (N/mm2)	Elongation (％)
195～	110～	7～

Plastic coating vinyl

Stock Size

Shape	Diameter /Thickness	width	Length	＊Flatness	Method of manufacturing	Remark
plate	5 (-0.07/+0.07)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	6 (-0.08/+0.08)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	8 (-0.10/+0.10)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	10 (-0.10/+0.10)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	12 (-0.10/+0.10)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	15 (-0.15/+0.15)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	18 (-0.16/+0.16)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	20 (-0.18/+0.18)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	22 (-0.20/+0.20)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	25 (-0.25/+0.25)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	30 (-0.30/+0.30)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	35 (-0.03/+0.03)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	40 (-0.40/+0.40)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	45 (-0.40/+0.40)	1525	3050	0.4	Hot Rolling	Double-sided vinyl
plate	50 (-0.40/+0.40)	1525	3050	0.4	Hot Rolling	Double-sided vinyl